SOP for Cleaning and Sanitation of Warehouse Area

Category: Pharma SOPs,Warehouse SOPs
written by Abdus Sobhan Salim | May 7, 2025
SOP for Cleaning and Sanitation of Warehouse
Learn how to write an effective SOP for cleaning and sanitation of warehouse area in pharmaceutical facilities to ensure compliance with Good Manufacturing Practices (GMP) and to maintain the integrity of stored materials.
SOP for Cleaning and Sanitation of Warehouse

1.0 PURPOSE

To describe a standardized procedure for the cleaning and sanitation of warehouse area to prevent contamination and ensure the proper storage conditions for raw materials, packaging materials, and finished goods.

2.0 SCOPE

This SOP is applicable to all warehouse area including receiving, quarantine, sampling, approved storage, rejected material areas, and dispatch zones within the pharmaceutical manufacturing facility.

3.0 RESPONSIBILITY

3.1 Warehouse personnel are responsible for executing cleaning and sanitation activities as per the procedure.

3.2 Sanitation/Cleaning staffs are responsible to assist in cleaning as required.

3.3 Warehouse In-Charge is responsible to ensure proper implementation and record-keeping.

3.4 Quality Assurance (QA) is responsible for verification and periodic audits.

4.0 ACCOUNTABILITY

4.1 Head of Warehouse Department

4.2 Head of Quality Assurance Department

5.0 ASSOCIATED DOCUMENTS

5.1 Cleaning Logbooks

5.2 Cleaning Schedule

5.3 Material Movement Register

5.4 Deviation/Incident Report Form

5.5 Disinfectant Usage Record

6.0 PRECAUTIONS

6.1 Use appropriate PPE (Personal Protective Equipment) during cleaning.

6.2 Ensure no materials are exposed during cleaning activities.

6.3 Use only approved cleaning agents and disinfectants.

6.4 Avoid cross-contamination between different material storage zones.

7.0 PROCEDURE

7.1 General Cleaning Schedule and Frequency

 7.1.1 Follow a master cleaning schedule covering daily, weekly, and monthly activities.

 7.1.2 Daily cleaning includes sweeping and mopping of accessible floor areas.

 7.1.3 Weekly cleaning includes dusting of high surfaces, ceiling, wall, racks, and pallets.

 7.1.4 Monthly cleaning includes deep cleaning of hard-to-reach areas and maintenance checks.

 7.1.5 The cleaning frequency may be increased in case of spillage, contamination, or seasonal changes (e.g., monsoon or dusty conditions).

7.2 Cleaning of Floors, Walls, and Ceilings

 7.2.1 Clean floors daily using approved disinfectants and mop them with a clean, damp mop.

 7.2.2 Use separate color-coded tools for different zones (e.g., raw material, packaging material, finished goods areas).

 7.2.3 Remove cobwebs and dust from walls and ceilings at least once a week.

 7.2.4 Ensure that cleaning does not interfere with ongoing material handling or storage operations.

7.3 Cleaning of Racks, Pallets, and Storage Bins

 7.3.1 Clean racks and pallets weekly using a clean, dry cloth or a vacuum where appropriate.

 7.3.2 Disinfect bins before use and after removal of materials.

 7.3.3 Inspect for signs of damage, rust, or contamination and report any issues to warehouse in-charge.

7.4 Cleaning and Sanitation of Equipment (e.g., forklifts, trolleys)

 7.4.1 Clean all material handling equipment at the end of each shift.

 7.4.2 Sanitize high-touch areas such as handles and control panels with disinfectant.

 7.4.3 Ensure equipment is dry before reuse and parked in designated clean zones.

7.5 Documentation of Cleaning Activities

 7.5.1 Record each cleaning activity in the designated Cleaning Logbook.

 7.5.2 Include details such as date, time, area cleaned, name of personnel, and supervisor signature.

 7.5.3 Attach checklists to verify compliance with scheduled cleaning tasks.

 7.5.4 Maintain cleaning records for audit and traceability.

7.6 Handling and Disposal of Waste and Used Cleaning Materials

 7.6.1 Collect waste generated during cleaning in labeled, sealed containers.

 7.6.2 Dispose of waste materials in accordance with local environmental and safety regulations.

 7.6.3 Ensure used mops, cloths, and brushes are cleaned and disinfected or replaced after use.

 7.6.4 Store cleaning tools in a designated area away from storage zones.

7.7 Monitoring and Verification by QA

 7.7.1 QA shall conduct periodic inspections to verify cleaning effectiveness.

 7.7.2 Swab testing or visual inspection may be used as part of verification.

 7.7.3 Any deviations or non-conformities must be documented and addressed through CAPA.

 7.7.4 QA will review and sign off on cleaning records during routine audits.

8.0 ABBREVIATIONS/DEFINITIONS

8.1 SOP: Standard Operating Procedure

8.2 GMP: Good Manufacturing Practices

8.3 PPE: Personal Protective Equipment

8.4 QA: Quality Assurance

8.5 QC: Quality Control

9.0 ANNEXURES

9.1 Annexure I: Cleaning Checklist – Daily

Annexure I: Cleaning Checklist – Daily

Date Start Time End Time Area Cleaned Cleaned By Checked by WH Checked by QA Remarks
    Receiving Area  
    Quarantine Area  
    Sampling Area  
    Approved Storage  
    Rejected Material Area  
    Dispatch Area  
    Corridors/Passages  

Signature of Warehouse In-Charge: ___________________
Signature of QA Personnel: ___________________

9.2 Annexure II: Weekly Cleaning Schedule

Annexure II: Weekly Cleaning Schedule

Week Area Task Description Cleaning Agent/Tool Assigned Personnel Date Completed Verified By (QA) Remarks
Week 1 Ceiling & Light Fixtures Dusting/Wiping Dry Cloth/Duster
Week 2 Wall Surfaces Disinfection Approved Disinfectant
Week 3 Storage Racks Deep Cleaning Mop/Disinfectant
Week 4 Floor Drains & Corners Scrubbing & Disinfection Brush/Disinfectant

Prepared by: ___________________
Approved by (Warehouse Head): ___________________

9.3 Annexure III: List of Approved Cleaning Agents and Disinfectants

Annexure III: List of Approved Cleaning Agents and Disinfectants

Sl. No. Cleaning Agent/Disinfectant Active Ingredient Concentration Intended Use Storage Conditions Expiry Date Approved By
1 Isopropyl Alcohol IPA 70% 70% v/v Surface disinfection Cool, dry place QA Manager
2 Quaternary Ammonium Compound Benzalkonium Chloride 1:200 dilution General area cleaning Room temp. QA Manager
3 Sodium Hypochlorite Solution NaOCl 0.1% Spill cleaning/disinfection Away from sunlight QA Manager

9.4 Annexure IV: Cleaning Record Log Book

Annexure IV: Cleaning Record Log Book

Date Area Start Time End Time Cleaning Agent Used Cleaned By Checked  By QA Verification Remarks
                 
                 
                 
                 
                 
                 
                 

Signature of Warehouse Supervisor: ___________________
Signature of QA Representative: ___________________

10. REVISION HISTORY

Version Date Description of Change Reviewed By Approved By
1.0